HEUFT BASIC-BA R20

2 Units available of inspectors. It detects cap, filling and organic remains.

Application

The basic device has been designed for a contactless checking of products and a automatic rejection of faulty units. It also permits the simultaneous monitoring of the function of filling installations and closer and labeler machines in bottling lines.

Technical specifications

Rating

Maximum transport speed: 1.5 m/s

Maximum output: 72.000 B/H

Maximum container height: 350 mm

Fill level range: 30 – 280 mm

Electrical system

Voltage: 230V +/- 10%     240V +6%/ -10%    115V +/- 10%    

Frequency: 50/60 Hz

Connected power: 500 VA

Power consumption: 150 W

Safety device of the customer: B-Automat 10 A

Min. conductor cross section: 1.5 mm²

Rating of X-ray generator unit (only in case of fill level detection, X-ray)

Maximum operating value of the X-ray tube: 60 kV / 15 µA

The size of the radiation exit angle is limited by a collimator:

Diameter of the radiation-exposed surface on the emitter side: 12.67 mm

Diameter of the radiation-exposed surface

            In case of the standard passage width 90 mm (Ø): 24.93 mm

            In case of the maximum passage width 150 mm (Ø): 32.67 mm

Manufacturer of the X-ray generator unit 1/15-LTFM 71: HEUFT SYSTEMTECHNIK GMBH

 Qualification approval: RP01/99/Rö

Compressed-air supply

Compressed-air for the rejector min/max: 6 bar/ 12 bar

 Line cross section: ½ inch